PLANERS.

• Fastest and safest blade change system on the market.
• 2-Speed feed rate system for rough and finishing stock removal.
• Patented cutterhead lock virtually eliminates snipe.
• Full range depth stop for any thickness from 1/8" to 6-12".
• Blade zero indicator to set the cutterhead the exact thickness of material.

 Product Description
13" Portable Planer, With 15A Motor, 13" x 6 1/2" Capacity, Head Locking Control To Reduce Snipe, 2 Speeds For Dimensioning/Finishing, Repeatable Depth Stop, Video, Blade Zero Indicator, Fast & Easy Blade Change, 2 Year Warranty.

• Supersize infeed and outfeed tables maximize work support.
• Compact and lightweight for easy transporting to the job-site.
• 15 amp motor delivers no load speed of 8,500 rpm.
• Table size of 13 by 30-3/8 inches.
• Patented Interna-Lok automated head clamp minimizes snipe.

Product Description
Cutting capacities: width 12", depth 1/8", thickness 6 3/32", No load speed 8,500 RPM, Amps (120V) 15, Disposable double edge blades, Quiet operation at only 83dB, Net weight 61 lbs.

• Three knife cutter-head for superior surface finish.
• Fan-assisted chip ejection system aids in the removal of debris.
• Two-speed gear box, 96 or 179 cuts per inch for the finest finish.
• Automatic carriage lock minimizes the movement that causes snipe.
• Solid 19-3/4-inch cast aluminum base provides for rigidity.

 Product Description
For squaring up rough lumber, reducing board size, and smoothing surfaces. 3 knife cutter-head. 2-speed gear box to change feed speed to optimize cuts per inch at 96 or 179 CPI. Fan-assisted chip ejection vacuums chips off of the cutter-head and exhausts them out of the machine. 19-3/4" cast aluminum base. Automatic carriage lock reduces the movement that causes snipe without the need for manual engagement by the user. Accepts 1/8" thru 6" thick stock. 15A, 10,000 RPM. Weight: 92 lb.

• 770 LBS.
• 5 HP Motor 1ph 230 Volt.
• Oil bath Gearbox.
• Integrated Casters for Mobility.
• Huge 55-1/2 inch by 20 inch cast iron table.

From the Manufacturer
This heavy duty planer offers performance and value, loaded with standard features not found on other machines in it's class. The powerful 5HP motor and 20" planing capacity will handle the most demanding work. The 5" dust port connects easly to any dust collector. The cutterhead has four high speed steel knives and turns at 5000 RPM producing 20,000 cuts per minute. The anti-kickback finger and pressure bar are located in close proximity to the cutterhead for an exceptional finish. The solid cast iron base, table and head are designed for production. The 2-speed oil bath gearbox transmits full power to feed rollers and facilitates fast speed changes at 24 and 31 FPM. The gearbox can be changed to 4-speed with the included gear to run lower speeds of 16 and 20 FPM. The corrugated infeed and fine groove outfeed rollers ensure a smooth feed. The precision ground and polished cast iron table rides on four steel posts giving it plenty of support for the larger workpiece. Heavy cast iron extension wings ensure a flat, smooth cut.

• Knife setting jig.
• Powerful 3-horsepower, one-phase, 230-volt motor.
• One-piece cast-iron table is 15-by-19-7/8-inch.
• Corrugated infeed roller and smooth outfeed roller.
• Three double-sided knives.

 From the Manufacturer
This 15-inch planer, with knife setting jig, is ruggedly designed to handle a wide variety of planing requirements. The one-piece cast-iron table provides greater infeed and outfeed support of long stock, for more accurate planing. The corrugated infeed roller and smooth outfeed roller provide positive feeding action. The double-sided knives will save you the time and money you'd normally spend on resharpening standard knives. The powerful 3-horsepower, one-phase, 230-volt motor with a magnetic control is protected from dust by the enclosed base and provides two-speed feed control.

Click here for more great PLANERS.